Instruction Guide

Climate control

The temperature in the entire building is centrally controlled via a sustainable heat pump, whereby the outside temperature is leading. In hot weather, you can adjust the temperature in the room by cooling down, and in cold weather, you can adjust the temperature in the room by heating up.

To do this, use the white control panel on the wall. By using + and - you can increase or decrease the temperature.

Please note that the central system determines whether cooling or heating can be used.

Sound

If you experience the sound of the climate control as disturbing and you want to switch off the system, please set up the temperature as following:

• In warm weather, you can increase the temperature via the white control panel. The system cannot heat up and will shut down. Please note that the system will start cooling again when the room has reached the set temperature (turn it up a few degrees to avoid this).
• In cold weather, you can lower the temperature via the white control panel. The system cannot cool and will shut down. Please note that the system will start heating again when the room has reached the set temperature (turn it down a few degrees to avoid this).
• In doubtful weather, try both options, you will notice within seconds-minutes at which position the system will switch off.

In case the climate control panel gives an error message, please contact our reception at +31 118 724 284.

Whirlpool

Are you staying in a room with a whirlpool?

Against the tile wall you will find two rotary knobs:

• By using the right rotary knob you can switch the water flow on and off.
• By using left rotary knob you can regulate the temperature of the water.

To use the bubble function, first fill the bath well. When it has reached the right level, you can switch on the bubble- and light function by using the two round (flat) push buttons on the edge of the bath. Does this not work yet? Then first fill the bath a little more and try it again.